Skip to main content
M K HeatingRequest a Call24-hour emergency serviceCall now, we’re always open07950 619 002

Landlord Gas Safety Certificate East London

CP12 landlord gas safety certificates across East London. Gas Safe registered engineers, annual checks for your rental, written quotes for any repairs.

Call 07950 619 002Request a free quote

4.9 / 5 from 117 Google reviews · Read customer reviews

Every rented property with gas needs a landlord gas safety certificate once a year. M K Heating carries out landlord gas safety checks across East London from Gas Safe registered engineers, leaves you the record for your files, and quotes any repair work in writing before it starts.

What the certificate is

The official name is a Landlord Gas Safety Record. Many people still call it a CP12, the reference of the old paper form, and landlords, letting agents and engineers all use the two names for the same thing. It is the signed record that confirms the gas appliances, pipework and flues in your rental property have been checked and are safe to use.

The duty applies to anyone who rents out a property they own under a lease shorter than seven years, or under a licence. It covers the gas appliances and flues you provide: the boiler, the hob or cooker, a gas fire, and the pipework that feeds them.

What the law asks of you as a landlord

The rules sit in the Gas Safety (Installation and Use) Regulations 1998 and are enforced by the Health and Safety Executive. The short version:

Have every gas appliance and flue you provide checked once every 12 months, and only by an engineer on the Gas Safe Register. Anyone who is not Gas Safe registered cannot legally work on gas in a rented home.

Keep each record for at least two years. Give a copy to your existing tenants within 28 days of the check, and give a copy to new tenants before they move in. For short lets of less than 28 days, a copy is displayed in the property instead.

One detail worth knowing: you can have the check done up to two months before the current certificate runs out and still keep your original renewal date. Booked earlier than that, the 12-month clock restarts on the day of the check, so the renewal date creeps forward. HSE publishes the fulllandlord gas safety guidance if you want the detail.

What our engineer checks

A gas safety check is a working inspection, not a glance. On each appliance the engineer confirms it is burning correctly, at the right operating pressure, with enough air supply and a flue that clears the fumes properly, and that the safety devices would shut it down if a fault developed.

The record you receive lists each appliance and flue checked and where it is in the property, the date of the check, the engineer's name, registration number and signature, and anything found that needs attention. That is what your tenants, your letting agent and the council all ask to see.

A gas safety check is not a boiler service

The two jobs overlap but they are not the same. The safety check asks one question: are the gas appliances safe to use right now? Aboiler service goes further: it keeps the boiler running as the manufacturer intended, keeps the warranty valid, and catches worn parts while they are still small repairs.

Landlords need the safety check every year by law. Many landlords book the two together, one visit, one trip for the tenant, and both sets of paperwork in hand. Tell us when you call and we will set it up that way.

If the check finds a problem

It happens, and it is not a drama. Gas safety findings come in two classes. At risk means a fault that could become dangerous if the appliance keeps running. Immediately dangerous means it must not be used at all. In either case the engineer explains the finding in plain English, issues a warning notice, and attaches a Danger Do Not Use label so nobody uses it by mistake. With your permission, the engineer also turns the appliance off, and disconnects anything classed as immediately dangerous. The permission covers turning it off and disconnecting it, not whether it can stay in use. The law says an immediately dangerous appliance must not be used again until it is repaired, and if permission to disconnect is refused the engineer reports it to the gas emergency service, which has legal powers to make the situation safe. Keeping the appliance out of use until the repair is done is your responsibility as the landlord.

The repair itself is a separate decision and a separate cost. We quote it in writing before any work goes ahead, and you are never committed on the day. If we find a gas leak, we deal with the safety side first and ourgas leak detection page explains how those jobs are handled.

What a landlord gas safety check costs

The fee depends on how many gas appliances and flues the property has, so we do not list one fixed price. Call us with the property details for a straight price before booking. Any repair the check uncovers is quoted separately in writing, and if the check finds nothing, you pay for the check and nothing else.

Book a landlord gas safety check across East London

The easiest slot is inside the two months before your current certificate expires: the new one keeps the old renewal date and your compliance calendar never drifts. We cover 22 neighbourhoods across East London: check the areas we cover or call 07950 619 002, tell us the property and the number of appliances, and we will give you the price and the next available date.

Frequently asked questions

What is a CP12?

CP12 is the old form number for the landlord gas safety record. The paperwork is now called a Landlord Gas Safety Record, but landlords, letting agents and engineers still say CP12. They are the same document.

How often does a landlord gas safety check have to be done?

Once every 12 months, on every gas appliance and flue you provide, by a Gas Safe registered engineer. You can have the check done up to two months early and still keep your original renewal date.

What does the check include?

The engineer checks that every appliance you provide burns correctly, at the right operating pressure, with the flue clearing properly and the safety devices working. The record lists each appliance checked, the date, and anything that needs attention.

Is a gas safety certificate the same as a boiler service?

No. The safety check asks whether the gas appliances are safe to use. A service keeps the boiler running efficiently and catches faults early. Landlords need the safety check by law; the service is worth having alongside it.

What happens if the engineer finds a problem?

You get a straight answer. Anything unsafe is classed as at risk or immediately dangerous, explained in plain English, given a warning notice and a Danger Do Not Use label, and turned off with your permission. An immediately dangerous appliance must not be used again until it is repaired: further use breaks gas safety law, and a refusal to allow the disconnection is reported to the gas emergency service, which has legal powers to step in. Keeping the appliance out of use until it is repaired is your responsibility as the landlord. Any repair is quoted separately in writing before it starts.

How much does a landlord gas safety certificate cost?

It depends on how many gas appliances and flues the property has. Call us with the property details for a straight price before booking. If the check finds nothing, you pay for the check and nothing else.

Speak with an East London heating engineer

Get clear advice and a free written quote before booking.

Request a quote

Request a Callback

Leave your number and tell us briefly what you need.

For urgent help, call us any time:

07950 619 002

Your details are used only to respond to your enquiry, in accordance with our Privacy Policy.